How you can Attach Rabbit Ears to some High definition tv

How To Hook Up Rabbit Ears Antenna Related Questions

What is the most powerful TV antenna?

Best amplified indoor TV antenna:Winegard FlatWave Amped (model FL-5500A) Best roof-mount TV antenna:Antennas Direct DB8e. Best attic/outdoor TV antenna:Winegard Elite 7550.5 days ago

How do you connect rabbit ears to digital TV?

– Connect a coaxial cable to the “Out to TV” jack on the base of the rabbit ears. – Attach the other end of the coaxial cable to the “RF IN” or “Coax IN” jack on the back of the HDTV. – Plug in the electrical cord, if the rabbit ears are equipped with a signal amplifier.

Trending How To Control Mad Elephant?

Trending How To Control Mad Elephant?

How effective are indoor TV antennas?

Not really. Indoor TV Antennas are very small in size and strength, and therefore the indoor Antenna does not give a good signal to the TV. Digital TV’s, which is what we have in Australia now, require a good strong clean signal to get the information it needs to display a crisp clear image.

Can rabbit ears be used with digital tvs?

Connect your rabbit ears to your digital converter box or directly into your digital TV. If you have a digital converter set up, plug a cable from the converter to the back of your TV. A weak digital signal may result in ghost images or no image at all.

Are digital antennas better than rabbit ears?

Typically rabbit ears are good for VHF and loop for UHF. If you’re getting good signal you may not see any advantage with something marketed as “HD Antenna”… in fact most “leaf” antenna are good at UHF and sometimes VHF… so you might get less out of a leaf.

What is the longest range antenna?

Model Reception Range Supported Quality ———————— ————— —————– Sobetter Outdoor Antenna 150 miles 1080p HDTV Mohu Sky 60 TV Antenna 75 miles 1080p HDTV 1byone 4K TV Antenna 200 miles 4K Winegard Air FL6550A 60 miles 1080p HDTV

How do I get the best reception with rabbit ears?

Attach your rabbit ears to the input area of your television. The coaxial input is normally in the back of your TV and looks like a small screw with a hole in the middle. Screw the cable from your rabbit ears into the input, tightening it down firmly. A tight connection will make for optimal reception.

Do rabbit ears work on smart TV?

The short answer is yes, but only in some areas. If you are located in an area with good reception, such as an inner metropolitan area, close to the TV towers, an indoor antenna is likely to work! An indoor antenna will work best if it’s near a window on the side of the house facing towards the TV transmitter towers.

Will rabbit ears work with digital TV?

There are many ‘bunny rabbit’ ear indoor TV antenna products on the market, but do they work for digital TV in Sydney? The answer is yes, you can use ‘bunny rabbit’ ear indoor TV antennas to get digital TV reception in Sydney, but only in very limited circumstances.

Which TV antenna has the longest range?

The CM-5020 Masterpiece Antenna Series digital HDTV antenna in our opinion is the best long range outdoor HDTV antenna. It will receive both digital TV and HDTV programming at a reception range of up to 100 miles. This high quality antenna is designed for extreme conditions and is easy to install.

Do TV antennas work in apartments?

What if I live in an apartment? Larger buildings like an apartment block or group of townhouses may have a shared antenna system, also known as a Master Antenna TV (MATV) system. While many shared antenna systems are adequate for both analog and digital TV reception, some may need to be upgraded or replaced.

How do I connect rabbit ears to my TV?

– Connect a coaxial cable to the “Out to TV” jack on the base of the rabbit ears. – Attach the other end of the coaxial cable to the “RF IN” or “Coax IN” jack on the back of the HDTV. – Plug in the electrical cord, if the rabbit ears are equipped with a signal amplifier.

How do I connect rabbit ears to my Smart TV?

– Connect a coaxial cable to the “Out to TV” jack on the base of the rabbit ears. – Attach the other end of the coaxial cable to the “RF IN” or “Coax IN” jack on the back of the HDTV. – Plug in the electrical cord, if the rabbit ears are equipped with a signal amplifier.

How can I make my antenna work better?

How To Get More Channels with Your Indoor Antenna

  1. Experiment with Different Locations in Your Home.
  2. Use a Longer Cable To Reach That Window.
  3. Face it Towards the TV Transmitter Towers.
  4. Lay Your Antenna Flat Horizontally.
  5. Move it Higher Up (Highly Recommended)
  6. Put it in a Skylight (Highly Recommended)
  7. Use a Better Cable (Highly Recommended)
  8. Eliminate Electronic Interference.

Video

What input should TV be on for antenna?

Virtually every TV has an antenna input on the back or side; this is where you’ll plug in the antenna. There are two main versions of this input: Coaxial RF – Resembles a threaded cylinder with a hole in the middle. This type of connector is the standard for most modern TVs.

How do you hook up rabbit ears to a smart TV?

Connect your rabbit ears to your digital converter box or directly into your digital TV. If you have a digital converter set up, plug a cable from the converter to the back of your TV. A weak digital signal may result in ghost images or no image at all.

What is the most powerful indoor TV antenna?

The Best Indoor HDTV Antenna

  • Our pick. Antennas Direct ClearStream Flex. A powerful TV antenna with flexible installation options.
  • Runner-up. RCA ANT3ME. For easier, quicker setup.
  • Upgrade pick. Winegard Flatwave Amped Pro. For finding hard-to-receive stations.
  • Budget pick. 1byone Digital Amplified Indoor HDTV Antenna.

You might be interested:   Question: What Does White Rabbit Mean?

The Bunny Lady Newsletter

Subscribe to the Bunny Lady e-Newsletter and receive a FREE pdf guidebook going over all the basics of rabbit care.

sign up

Fosmon 25-40 Mile Indoor Rabbit Ear TV Antenna Review

Show Description

his is my review of this Fosmon 25-40 Mile Indoor VHF/UHF HDTV Antenna. It runs about $12 on Amazon and looks like a pretty basic rabbit ear antenna. I include my opinion of this antenna along with where I would recommend it..Link to antenna on Amazon:https://amzn.to/39z30vP.Link to reception analysis websites:https:///.https://www.fcc.gov/media/engineering/dtvmaps.https:///searchmap.php.Check out my Amazon Page for recommended antennas and accessories:https://azon.com/shop/antennaman.Link to Channel Master’s website:https://www.channelmaster.com/?Click=201434.For a TV antenna installation or custom antenna recommendation visit my website http://antennamanpa.com/index.html.Consider supporting these videos on Patreon:https://www.patreon.com/AntennaMan.You can also contribute through PayPal:https:///pools/c/8cwRt7M0g4.Sign up to my e-mail list:https://bit.ly/2whSoTI.Like my Facebook page:https://www.facebook.com/AntennaManPA/.E-mail general questions to [email protected]

Video taken from the channel: Antenna Man

Final Thoughts

Our furry rabbit friends are arguably some of the cutest in the animal kingdom. All that cuteness still requires care, though – especially when it comes to the ears. 

Rabbits’ ears need to be cared for and checked on relatively routinely, and you should always try to be aware of their rabbit’s ear health.

That way, you can take the necessary steps to keep your rabbit’s ears clean, note if there are any symptoms of ear problems, and take the rabbit to the vet for further care if necessary.

Once you know how to check on and care for your rabbit’s ears, those ear problems may just hop right away.

Ear positions in rabbits

Rabbits have a lot of control over their ears. The ears can swivel 270º to listen to sounds from any direction, and they also have movement front and back with limited movement side to side. As you observe your rabbit, you’ll find that they move their ears around quite a lot. Watching the ears is a great way to figure out if your rabbit is curious, angry, or even happy.

Upright and relaxed ears

The default rabbit ear position is upright and relaxed. The ears won’t look rigid or be obviously pointed in any specific direction. The ears will usually be wide apart and this time, and not touching or close together, but that can depend on the breed of rabbit. Some breeds naturally have close-set ears. You may also notice the ears sway or bob a little in this position as the rabbits hop around.

Alert ears are more rigid and pointed than the ear
Alert ears are more rigid and pointed than the ears of a confident or relaxed rabbit.

Upright and rigid ears

When rabbits get scared, they will stick their ears straight up and hold them in that position. The opening of the ear will often face directly forward, but the ears can also face toward a different direction where the rabbit heard a strange sound. Your rabbit might be standing on all fours, or they’ll be up on their hind legs looking for the source of danger.

This is when the rabbit goes on the alert. They may have heard a threatening sound, and they’re trying to listen closely to figure out what the danger is and where it’s coming from. You will probably see your rabbit freeze and point their ears up to listen. Then they will move to a different place and freeze to listen again. The rabbit will continue to have rigid posture and ears until they calm down and believe the danger has passed.

A cautious rabbit will walk forward on their front
A cautious rabbit will walk forward on their front legs while stretching out their hind legs behind them. Their ears will be directed forward and their tail stretched out and pointed down.

Ears slanted forward

When a rabbit slants their ears forward over their head, this indicates curiosity and caution. The ear’s opening will also face ahead, pointing over your rabbit’s head. Your rabbit might be curious about a new object in the room, or they might be slowly venturing to explore a new area in the house.

Along with the forward-slanted ears, you will probably see your rabbit’s nose speed up as they gather information about their surroundings through smell. You’ll also see your rabbit tiptoe to cautiously approach whatever it is they are interested in, often keeping their back feet in place as they stretch forward with their front legs.

When rabbits are aggressive, they will raise their
When rabbits are aggressive, they will raise their tail and pull back their ears while they growl and lunge forward.

Ears slanted backward

When rabbits move their ears to a back at a rigid 45º angle, this is a sign of anger or aggression. The inside of the ear will also be turned back and down, and you may hear your rabbit growl. At the same time, the rabbit’s tail will go up, and you might notice them jut out their chin, getting ready to bite.

This is your rabbit letting you know that they are getting ready to strike. They may bite or scratch you if you come any closer. Sometimes rabbits get aggressive out of fear, and the rabbit is scared of you or whoever is approaching. Other times this behavior is territorial, and the rabbit is defending their space.

When rabbits sit in a relaxed position, they will
When rabbits sit in a relaxed position, they will often lay their ears together along their back.

Ears together along the rabbit’s back

When rabbits lay their ears down along their back, they are relaxing. Typically, you’ll notice this when the rabbit is loafing around or sprawled out to relax. The rabbit will put their ears against their back to indicate that they are very relaxed and don’t see any need to pay attention to their surroundings. They feel safe and content.

For many breeds of rabbits, the ears will naturally be close together and touching when they are relaxed like this. However, breeds with wide-set ears will also relax with ears wide along their back. My rabbit even has one droopy ear that will lay almost along her side when she’s sprawled out on the ground.

Rabbits who flatten their bodies against the groun
Rabbits who flatten their bodies against the ground may be scared or exhibiting a submissive behavior to a more dominant rabbit.

Ears apart along the rabbit’s back

When a rabbit lays flat on the ground with their ears spread wide on their back, the rabbit is taking a submissive position. They will do this more often around other rabbits than around humans, so you may not see this if you only have a single rabbit. The rabbit will do this to submit to the more dominant rabbit in the pair to make sure they aren’t threatening the leader.

This is also why it’s essential to take your rabbit’s whole body language into consideration. If the rabbit is lying down, relaxed, and their ears are wide apart, it’s probably a relaxed posture. If the ears are wide and rigid along the back while the rabbit is stiff against the floor, they are more likely scared and taking a submissive posture.

One ear up

Sometimes rabbits don’t feel threatened at all, but they still want to pay attention. If the rabbit is relaxed on the ground or in a loaf position, they might put one ear up to let you know they are lazily aware and paying attention. However, they don’t feel the need to go on the alert or even move much from their comfortable position.

I also see this a lot when my rabbits are eating and want to keep some level of alertness. They are mainly focused on enjoying their food, but they’ll keep one ear up to maintain a basic level of awareness. One ear up is like having a lazy and non-urgent level of alertness.

Swiveling ears

Rabbits will swivel their ears in any direction to listen to sounds around them. In some cases, they’ll only rotate one ear to catch a sound coming from one direction. Most of the time, this is just a cursory level of alertness for rabbits. Like the way humans immediately look to see any movement in the room, rabbits will instinctively move their ears around to catch any noise. 

However, you’ll also see this same behavior when your rabbit is on the alert. In these cases, the rabbit will have upright rigid ears, and they will rotate them to figure out which direction a dangerous sound is coming from. This is because rabbits can pinpoint sounds very effectively. The cupped shape of their ears allows them to collect sound information directionally. It’s a valuable survival feature for wild rabbits who try to figure out what direction a potential predator is coming from.

A rabbit will shake their ears because they are it
A rabbit will shake their ears because they are itchy. They will also shake to tell you to go away, or if they are happy.

Shaking ears

Sometimes you will also notice your rabbit shaking their ears. They’ll move their whole head to flop their ears around from side to side. This is a behavior that actually has a few different meanings depending on the context. Even though the behavior looks very similar, you will need to watch your rabbit closely to figure out what they are saying.

  • Itchy ears. If a rabbit shakes their ears a few times in a row, rather than just once, this typically means they have an itch in their ears. It may be followed by some ear scratching with their back legs, or they might try to clean their ear by grabbing it with their front paws and bringing it to their mouth. This is nothing to worry about if it only happens occasionally. However, frequent itchy ears can be a sign of ear mites or infection.
  • Leave me alone. If you try to pet your rabbit or go up to them when they want to be left alone, the rabbit might shake their ears at you to tell you to go away. Most often, it will happen when your rabbit is exploring. If you reach toward them, they will shake their ears and hop off to tell you they have their own business to take care of right now.
  • Mini binky. The other time you will notice your rabbit shake their ears is when they are performing a mini binky. A binky is a twisting jump that rabbits do when they are very happy. Sometimes they don’t feel like doing a full-blown binky and will instead just shake their head and shoulders to show how excited they are.
Lop rabbits don’t have as much control over
Lop rabbits don’t have as much control over their ears, but they can still move them a little. They can move their ears forward if they are curious or cautious, or rotate them to hear better in different directions. Many lop rabbits will also airplane their ears when they are excited.

How Long Should You Treat Ear Mites?

Image by Thanks for your Like • donations welcome

Image by Thanks for your Like • donations welcome from Pixabay

Apparently, rabbit ear mites have a 21-day life cycle. Why is that important?

Well, it means you have to make sure you treat for that long just to ensure you’ve wiped out every last possible egg or reproducing adult.

Click here for a handy PDF file describing ear mites, plus skin and fur mites too. I will warn you that the treatments they recommend are chemically oriented. But the rest of the information is good, and the photos of these microscopic creatures are fascinating.

Tags